How the Brilliant Wireless Light Works: Charging, Brightness, and What to Expect
Whether you just opened the box or you're trying to figure out whether this light is right for you before buying, this post covers everything: how to charge it, how long it runs, how to read the indicators, and what the buttons actually do. No guessing, no surprises.
What you need to know
The Brilliant Wireless Light charges through a USB-C port on the back of the light using the included cable (wall adapter is not included). Use any standard USB-A wall adapter you already own, or charge it with The Light Providers Foldable Solar Panel, sold separately or as part of a bundle. The solar panel charges it from sunlight. Once it's charged, the light runs for 8 hours on high and 32 hours on low, and can charge your phone through the USB-A port.
How to charge the Brilliant Wireless Light
The light charges through a USB-C port on the back of the unit. The USB-C port is the input, meaning power flows in through this port to charge the battery. The included cable is a USB-A to USB-C cable, which means one end plugs into the power source and the other end goes into the USB-C port on the light.
There are two ways to charge it.
The first is from a wall outlet. Plug the USB-A end of the included cable into a standard USB-A wall adapter, then plug the USB-C end into the light. The wall adapter is not included in the box and is not sold by The Light Providers. Any standard USB-A wall adapter you already own works fine.
Important: Do not use the light while it's charging. Running the light while the cable is connected drains the battery rather than charging it. Always charge with the light turned off.
The second is from the Foldable Solar Panel. Plug the USB-A end of the cable into one of the solar panel's USB-A ports, then plug the USB-C end into the light. Place the solar panel in direct sunlight, and it begins charging. In full direct sunlight, the panel can fully charge two wireless lights in approximately 5 to 6 hours. For families in Sierra Leone, Nigeria, Ghana, or Liberia dealing with daily outages, this means the light charges during the day and runs through the evening and night without touching the grid.
Important: Do not charge with the solar panel in rainy conditions. The USB ports on the solar panel are not waterproof. Charge from the wall outlet when it's raining.
One cable, two ways to charge. When the grid is working, use a wall adapter. When it isn't, the solar panel keeps the light going.
Reading the LED indicators
The back of the light has four LED indicators that show the battery level. Three of the indicators are blue, and one is red. Together they give you a quick read on how much charge is left without needing to turn the light on.
| Indicator display | Charge level | What to do |
|---|---|---|
| 3 blue + 1 red (solid) | 100% — fully charged | Disconnect from charger |
| 2 blue + 1 red (solid) | 75% charge | Continue charging or use normally |
| 1 blue + 1 red (solid) | 50% charge | Continue charging or use normally |
| 1 red (solid) | 25% — low battery | Charge soon |
| 1 red (blinking) | Critical — too low to use | Charge immediately |
| Indicators blinking, then turning solid | Actively charging | Leave connected until fully solid |
During charging, each indicator blinks and then turns solid as the charge level rises. When all four indicators are solid, the battery is full. Disconnect from the charger to maintain battery health.
How the button cycle works
The light has one power button on the back. Each press advances through the modes in sequence. The first press turns the light on at high brightness. The second press drops to medium. The third press goes to low. The fourth press activates SOS mode, which pulses in a strobe pattern for emergency signaling. The fifth press turns the light off.
| Press | Mode | What it does | Runtime |
|---|---|---|---|
| 1st | High | Full brightness — 1100 lumens | 8 hours |
| 2nd | Medium | Reduced brightness for longer runtime | 14 hours |
| 3rd | Low | Lowest brightness, maximum runtime | 32 hours |
| 4th | SOS | Emergency strobe — pulses to signal for help | Until battery dies |
| 5th | Off | Light turns off completely | — |
Starting from off, the full cycle is: High, Medium, Low, SOS, Off. To get to low brightness, press three times from off. To turn it off from low, press twice more.
For the longest possible runtime, press three times from off to reach low mode. At low brightness, the light runs for up to 32 hours on a single charge.
How to set it up hands-free
The light has three built-in attachment options that keep it stable without anyone holding it.
The hook at the top of the unit lets you hang the light from any protruding point — a tent frame, a ceiling hook, a cabinet handle, or any fixture that can support it. This is the most common setup for general room lighting.
Two magnets on the back of the unit let it attach directly to any flat metal surface. This works well on metal shelving, appliance surfaces, or any ferrous metal wall or fixture. Make sure the magnets are securely attached before releasing the light to prevent it from falling.
The 1/4 inch universal screw attachment on the back connects to any standard tripod. The Light Providers FlexiTripod extends up to 6 feet and includes a flexible cable that lets you angle the light precisely after mounting. This is the best option for lighting a larger area, a workspace, a market stall, or an outdoor setup where coverage and height both matter.
Charging your phone from the light
The USB-A port on the back of the light is an output port, meaning it sends power out to other devices rather than receiving it. In a power outage when there's no wall outlet available, you can use the USB-A port to charge a phone or other USB device directly from the light's internal battery.
This is useful for families dealing with daily outages in Nigeria, Sierra Leone, Ghana, or Liberia where keeping a phone charged for WhatsApp calls and emergency contact is a daily priority. The light provides both illumination and phone charging from a single charge.
This dual function, lighting and phone charging, is also why the light must travel as carry-on luggage when flying. TSA classifies any device that can charge other devices as a power bank, and power banks are not permitted in checked luggage. The light flies in the cabin with you.
The USB-A port means one charge runs the light all evening and keeps the phone ready for calls. In a community with daily power cuts, those two things together matter more than almost anything else.
A few things to know about storage and maintenance
If you won't use the light for an extended period, switch it off and recharge it every three months. Lithium batteries held at a very low charge for long periods lose capacity over time. Periodic top-ups keep the battery healthy.
The light has an IPX4 waterproof rating, which means it handles splashes and light rain without issue. It's suitable for outdoor use. The USB ports have a waterproof plug that covers them when not in use. Replace the plug when the ports aren't in use to keep them protected.
To clean the light, use a soft cloth. Avoid submerging it or exposing the open USB ports to water.
Ready to try it?
The Brilliant Wireless Light is available at The Light Providers. Charges from a wall outlet or a solar panel. Runs up to 32 hours. Charges your phone when the grid can't.
Shop the Brilliant Wireless Light
Leave a comment